ALUMINIUM EXTRUSION SYSTEMS
CO. LTD
English Türkçe

Tel:
+90 212 858 22 03 Fax: +90 212 858 22 04
 
 
Home Page Extrusion Systems Service & Support References About Contact

About us

Our company was founded in 2011 with 25 years experience of aluminum extrusion. Periods without the production of aluminum profiles puller, clamp the profiles were removed. During this period we began to identify the problems which we live and at every point, from our experiences that we have developed over time. Aluminum profile produced by combining our experience with our knowledge of machine design innovations offer the service sector.

Aluminum profile extrusion industry due to the ever-increasing demands knowledge, experience and innovation are needed. Our company was established to meet those requirements.

Aluminium profiles, press and then the appropriate mold, the operator and conveyor systems are left to cope with. Operators with backward technology and machines hard not problematic, and problems can not control the profile begins at this point. For this reason, efforts have concentrated on the conveyor profile.

Our systems are being imitated, completely manufactured in Turkey. Made in Turkey with a completely new designs under the umbrella of the production of extruded profiles is time Alkoneks lines.

Currently, the press launch, which saw each station to produce the output.

The most significant innovation we bring the sector, Hot Billet Brushing System.

2000 Vickers Hardness of aluminum oxide. In fact, a hard material used in metal etching and sandblasting work. Wearing of the mold to produce aluminum profile, the most important cause of the aluminum oxide by heat. When aşınmadığı mold surfaces, anodized surfaces after the profile is much smoother.

Billet surfaces, rank the following reasons, aluminum oxide (Al²O³) is composed.

  • Billet during molding due to cooling with water,

  • Due to a homogeneous temperature in the furnace,

  • Ambient conditions for interaction with oxygen and other gases, aluminum,

  • Of transport and storage conditions unfavorable for pollination and other factors,

  • Annealing furnace before extrusion.

Ourselves, making brushing machine design and production of hot billets. Moving the technology we use computer technology in the process of brushing the PLC (Programmable Logic Controller) control, we've made it feasible.

There are places in this system is working actively produce our references.
 

Home Page   |  Extrusion Systems  |  Service & Support  |  References  |  About  |  Contact

Alkoneks Aluminium Extrusion Systems Co. Ltd. - All Rights Reserved

brushing the hot billet aluminum extrusion profile aluminum profile systems, cooling systems, conveyor arms stretching puller final cut saw blade profile line drawing machine profile magnetic piston hydraulic roller brush system